Logo stampa
800 185 075 800 185 075

Castiglione delle Stiviere (MN) selection and recovery plant

Via Torquato Tasso, 21/23, 46043 Castiglione delle Stiviere (MN)

  • 1 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 2 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 3 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 4 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 5 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 6 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 7 / 8   Castiglione delle Stiviere (MN) selection and recovery plant
  • 8 / 8   Castiglione delle Stiviere (MN) selection and recovery plant

The plant recovers of processing scraps from area industrial facilities using evolved technologies to reduce quantities of waste sent for disposal as much as possible, by favouring recovery through separation with the production of 3 types of secondary solid fuel/RDF.

Page updated 26 August 2015

 
    Annual treatment capacity
    • (R3) Recycling/reclamation of organic substances which are not used as solvents (including composting and other biological transformation processes): 15,500 tonnes/year
    • (R12) Exchange of wastes for submission to any of the operations numbered R1 to R11: 130,000 tonnes/year
    Type of waste accepted at the plant
    Non-hazardous dry solid waste from collection at artisanal, industrial production and commercial activities, and treatment of non-reusable fractions from selection for the production of secondary solid fuel to be recovered
    Subsequent destination of waste
    The secondary solid fuel is sent to cement works and/or waste-to-energy plants for recovery
    Treatment lines
    2
    Recovery efficiency
    70% - 75%
    • Treatment/selection and sorting, for material recovery (secondary raw materials) from non-hazardous dry solid waste from collection at artisanal, industrial production and commercial activities in the surrounding area;
    • Treatment of non-reusable fractions for the production of secondary solid fuel with 3 different types of production:
      • secondary solid fuel sized less than 30 mm, sent to cement works for recovery, which use it as an alternative to conventional fuels;
      • secondary solid fuel sized less than 120 mm, sent to waste-to-energy plants for recovery;
      • secondary solid fuel sized between 120 and 300 mm, sent to waste-to-energy plants for recovery.

    On these lines, the waste is put through a series of manual and mechanical operations (optical readers, sieves, magnets, etc.) for selecting the fractions present in the various flows of treated waste, in order to ensure adequate product uniformity of each recovered fraction by eliminating scraps and materials not amenable to recovery.

Map
Share this